Firewright / Support & calculation guide
Support & calculation guide
Download Firewright on the App Store for iPhone. The web preview also includes the four free calculators. Pro purchase and native PDF sharing require the iOS app.
Contact caglarbozkurt@outlook.com. For a calculation question, include the app version, calculator, inputs, expected result and the manufacturer or code reference. Remove confidential project information first.
What is free, and what is Pro?
Voltage Drop, Load Budget, Audibility and Detector Spacing are free. Firewright Pro is a one-time non-consumable purchase that adds Battery Sizing, Device Schedule, Distributed Voltage Drop, Power-Supply Budget and Conduit Fill. Saving dated records and exporting reports from any calculator also require Pro. Working drafts autosave without Pro. There is no subscription.
Start with the listed equipment data
Use the panel or power supply’s worst-case NAC-terminal output voltage, and the appliance’s listed maximum current at the selected voltage, candela and tone. A battery cutoff voltage such as 20.4 V is not automatically the voltage at the NAC terminals. The app deliberately leaves the supply field blank.
A voltage estimate can be calculated without a source reference. To save or export that estimate, enter the panel model and manual page or output table in the equipment/source reference field. Demonstration values on this website are not a listed-equipment design.
Understand each calculator’s scope
- Voltage Drop: a two-wire copper run with all load lumped at its end. Gauge recommendations check voltage, not terminal compatibility or ampacity.
- Distributed Voltage Drop: fixed-current taps at cumulative distances along one radial run of uniform wire gauge. It does not model branches or Class A fault paths.
- Battery Sizing and Device Schedule: entered standby and alarm loads, selected periods and an aging factor of at least ×1.25 for the stated 2022 basis. Verify battery chemistry, temperature, voltage, panel minimum/maximum, charger and cabinet. Series-connected batteries add voltage, not Ah.
- Load and Power-Supply Budgets: compare the sum of listed currents with the rating entered. The 80% warning is a design preference. Verify individual circuit, auxiliary, standby and manufacturer limits separately.
- Audibility: a public-mode, non-sleeping, free-field estimate. It includes one appliance plus sustained ambient at the selected listener. It does not model walls, room acoustics, multiple appliances, sleeping/private mode or intelligibility. Check all operating appliances and the nearest hearing location, and verify by measurement.
- Detector Spacing: a preliminary rectangular grid on unobstructed, smooth, level ceilings. It is not an optimized detector count or coverage approval. Heat ceilings above 30 ft are outside the lookup.
- Conduit Fill: individual 18/16 AWG TFFN or 14/12/10 AWG THHN/THWN conductors. Not jacketed FPL/FPLR cable. Supported raceways are EMT, PVC40 and RMC in the listed trade sizes.
The reference basis is NFPA 72 (2022) and NEC (2023), in English and imperial units. Always verify the adopted edition, listed equipment, site conditions and AHJ requirements. The app and automated tests do not establish professional certification or manufacturer approval. The source ledger and model limits are available in Settings and each calculator.
Save, reset and recover a calculation
- Expand “Name this calculation.” Add a shared job name and a circuit/calculation name.
- With Pro, “Save record” creates a separate dated snapshot. Later edits do not change it.
- “Load working copy” restores its inputs and recalculates with the current app version. The saved original stays unchanged.
- “Reset inputs” retains the names. “Undo” restores the immediately preceding working draft.
Up to 200 records are stored on the device. Export and remove an older snapshot if the limit is reached. Each row-based calculator supports up to 1,000 rows. Deleting the app or its data can remove local work.
Export and backup
In the iOS app, Pro exports a paginated PDF through the system share sheet. Reports include names, inputs and units, results, assumptions, source references, timestamp and app version. Export the saved report to preserve its original result, or export the working copy for a recalculated result.
Reports are readable backups of the calculation evidence. They cannot be imported to restore working inputs. Drafts and records do not sync between devices. If local storage is unavailable, drafts may last only for the current session; export a report where Pro is available.
Purchases and restoring Pro
After the iOS release, open Settings → Restore purchase using the Apple Account that owns Pro. A successful ownership check unlocks Pro. If verification fails, reconnect and try again; an unavailable check is different from verified absence of ownership. Apple handles payments and refund requests.
A previously verified Pro entitlement is cached for offline use. Refunds, revocations and account changes are reconciled after a successful fresh check. The web preview does not sell or restore Pro.
Offline use and browser preview
The installed iOS app bundles its calculators and works without a web server. Purchases, reference links and support email require connectivity. The browser preview requires a connection to load and has no guaranteed offline cold start. Calculations run locally once loaded.
Reporting a problem
Send the device and OS version, app version, exact steps and expected/actual result. For calculation errors, include the relevant source. Do not send confidential site plans, customer details or payment information. Physical-device purchase, accessibility and professional acceptance checks remain part of release preparation; the website does not claim they are complete.